Upstyled TV Cabinet



There have been so many old TV cabinets for sale online that I decided there must be something that can be done with them! I purchased this off Craigslist for $20 and decided to use it for a small corner in one of our guestrooms.

 It had been painted before but no worries! I painted over it in left over Behr Moss Green paint I had from painting another bedroom. Once that dried I wiped some dark Minwax stain over it. The crystal knobs were from Michael's for $1.50 each...

 ...and voila! a bookshelf/storage/mirror stand thing was born.


Comments

Post a Comment

Popular posts from this blog

Painting a Lava Rock Fireplace

Image
The decision to paint our lava rock fireplace wasn't a hard one. The crumbling porous rocks and general ugliness was practically screaming for a makeover. I did a ton of research (online counts right?) on different ways we could update it but in the end painting it just seemed to be the cheapest and easiest option. Now make sure before you start this project you are very patient and have very strong upper body strength - you will need it. Lava rock is very thirsty. So thirsty that it drank about 2 gallons of primer. There are so many nooks and crannies that you need lots of different size paint brushes (and a mother in law to help). After several paint samples, we decided on Behr's Cracked Pepper which is a nice dark gray. The TV blends in with it too which we didn't really consider when choosing the color. Although not pictured, mounting the TV was not as complicated as it's made out to be. As long as a couple of the holes are flush with the rock, the TV
Read more

Penny Wall Tutorial

Image
As tedious as it seems, we has such a fun time making the penny wall! It turned out far better than we had expected! In a nutshell, this is how we made it. Materials - 3/8” Plywood - Liquid Nails Epoxy (Approx. 8 tubes) - Goof Off! - Pennies! - Molding - Metallic Paint (for molding) - Screws - Finishing Nails Tools - Drill         - Hammer - Hands This project pretty much started like this; “Lucy, I am going to make a penny wall on that space next to the dining table” “…Ok!”. …and off we went to The Home Depot. Clearly a lot of planning went into this. So we picked up our plywood and decided it would have to be thick enough to sustain the weight of the pennies – we got a piece that was 3/8” thick. Wally the wood guy was nice enough to cut it to size for us. The area of the wall we covered was 50” wide by whatever the height is from the floor to the ceiling. After a quick chat with our favorite paint guy Rick, we decided on a tube of Clear Liquid Nails Adhesive –
Read more